SRT-4
Fuel Injector Clinic Injector Set: 4x1100cc Saturated / High Impedance
Ball & Seat Injectors. These injectors utilize the latest technology
and provide great linearity and short pulse width repeatability.
Includes pigtails PGTJETR4Q or add Plug & Play adaptors PADPJtoU4. 1100cc/min @ 43.5 psi, 1270cc/min @ 58 psi
Fuel
Injector Clinic injector sets are precisely flow matched to within 1%.
Each injector within each set is individually numbered and results for
each injector are listed on a detailed flow sheet included with the set.
Dynamic flow matching is used only on injector sets where the
additional time and cost are justified by the corresponding benefits
gained during the tuning process.
Fuel Injector Clinic injectors
are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature
using CF-16B calibration fluid.
The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.
Fuel
Injector Clinic injectors are set up to and include all o-rings needed
to fit the factory application for the listed vehicle. For aftermarket
or other unusual setups please contact us prior to placing your order to
make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
Fuel Injector Clinic injectors use the factory electrical connector or
include solder-in pigtails. You can purchase adaptor ‘plug-n-play’
harnesses to avoid cutting your stock harness as an optional extra.
This
injector set contains high impedance injectors matched to the saturated
injector signal generated by this vehicle’s OEM ECU, OR is suitable for
use with an aftermarket ECU made or set up for high impedance
injectors.
Fuel Injector Clinic’s 1100cc high impedance injector
is the largest injector that has excellent idle performance in street
driven cars while still providing enough fuel to support mid to high
horsepower output. The Fuel Injector Clinic 1100cc injector is 20%
larger than our 900cc (Fuel Injector Clinic 900cc is the same as
‘1000cc’ sold by others).
The 1100cc high impedance injector can be used with any fuel type - It
is compatible with pump gasoline, E85, and all race fuels!
This
set of injectors requires you to change the injector plug on the wiring
harness in your car. This can be done by soldering in the pigtails
(included with purchase) to replace the plugs currently on your harness,
or you can choose to purchase the optional plug-n-play adaptors which
will convert from the type of plugs on these injectors to the plugs on
your harness without any need for cutting or soldering.
This plug
conversion is made necessary because FIC always chooses to provide
brand new, unused injectors for its performance applications. Since
consistent fuel delivery is critical to high performance engine
reliability we feel that using factory new injectors eliminates the
increased potential for failure that exists when using remanufactured
injectors.
We do not believe that increasing the chance of a failure due to using
remanufactured or core program based injectors is ever warranted.
Tech Tip: These Injectors are Same Height as Stock Injectors